We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Sector nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Sector nozzle(20) - List of Manufacturers, Suppliers, Companies and Products

Sector nozzle Product List

1～11 item / All 11 items

Displayed results
Air suction type fan-shaped nozzle "Uniform Distribution Nozzle (Air Suction Type) EJVV"

Air suction type fan-shaped nozzle "Uniform Distribution Nozzle (Air Suction Type) EJVV"

Standard pressure 0.3 MPa! Air suction type fan-shaped nozzle with a large spread in the spray thickness direction.

The "Uniform Distribution Nozzle (Air Suction Type) EJVV" is an air suction type fan-shaped nozzle that provides a uniform spray pattern with a wide flow distribution throughout its entire area. Compared to standard fan-shaped nozzles, it has a greater spread in the direction of spray thickness, with a width-to-thickness ratio of 3 to 4:1. The foreign object passage diameter and average particle diameter are slightly larger than those of standard fan-shaped nozzles, and when multiple nozzles are arranged, overlapping the patterns at both ends results in an even flow distribution across the entire width. 【Features】 ○ Uniform spray pattern with a wide flow distribution throughout the entire area ○ Width-to-thickness ratio of the spray pattern is 3 to 4:1 ○ Greater spread in the direction of spray thickness compared to standard fan-shaped nozzles ○ Slightly larger foreign object passage diameter and average particle diameter compared to standard fan-shaped nozzles ○ Composed of three parts: spray tip, cap, and adapter For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Control-type fan-shaped nozzle "Yamagata distribution nozzle (with control mechanism) SO-V"

Control-type fan-shaped nozzle "Yamagata distribution nozzle (with control mechanism) SO-V"

Difficult to drop the button! A fan-shaped nozzle that allows ON/OFF spraying with controlled air.

The "Yamagata Distribution Nozzle (with Control Mechanism) SO-V" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The internal piston moves up and down with control air, allowing for ON/OFF spraying. It is less prone to dripping and enables responsive spray control. Additionally, it is ideal for use in industries such as machinery, paper, pulp, printing, and food. 【Features】 ○ Generates a fan-shaped spray with Yamagata flow distribution ○ Spray pattern that is strong in the center and gradually weakens towards the ends ○ Less prone to dripping ○ Enables responsive control ○ ON/OFF spraying possible with control air For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-low pressure fan-shaped nozzle "Wide-angle uniform distribution nozzle (ultra-low pressure specification) LYYP"

Ultra-low pressure fan-shaped nozzle "Wide-angle uniform distribution nozzle (ultra-low pressure specification) LYYP"

All products are oil-free processed! Ultra-wide-angle fan-shaped nozzle that achieves uniform flow distribution at ultra-low pressure.

The "Wide Angle Uniform Distribution Nozzle (Ultra Low Pressure Specification) LYYP" is a wide-angle fan-shaped nozzle that achieves a wide angle and uniform flow distribution at ultra-low liquid pressure (0.015 MPa). It is a small flow type with a soft impact that does not create spray bubbles, and all products are treated to be oil-free. It is ideal for applications such as spraying developer solutions in semiconductor manufacturing equipment, micro-spraying in chemical manufacturing processes, and spraying chemical solutions onto surface-treated steel plates. The material is PVC, and it is an all-plastic integrated nozzle. 【Features】 - Generates wide-angle and uniform fan-shaped spray at ultra-low liquid pressure - Small flow type with a soft impact that does not create spray bubbles - All products are treated to be oil-free - All-plastic integrated nozzle For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible shape fan nozzle "Yamagata distribution nozzle (with flexible joint) UT+VP"

Flexible shape fan nozzle "Yamagata distribution nozzle (with flexible joint) UT+VP"

Adjustable spray direction! A fan-shaped nozzle that generates a fan-shaped spray with a Yamagata flow distribution.

The "Yamagata Distribution Nozzle (with Flexible Joint) UT+VP" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The VP nozzle with a ball joint is integrated with a ball for direction change, allowing the spray direction of the nozzle to be adjusted to less than 40°. It consists of a nozzle, cap, and adapter, with the nozzle's outlet made of ceramic. 【Features】 - Generates a fan-shaped spray with Yamagata flow distribution - Spray pattern is strong in the center and gradually weakens towards both ends - Spray direction of the nozzle can be adjusted to less than 40° - The nozzle's outlet is made of ceramic - Composed of a nozzle, cap, and adapter For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Ceramic nozzle! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a simple integrated nozzle that uses ceramic at the nozzle tip and is directly screwed into the pipe body. The strainer (for metal body products only) is standard equipment for small flow products and can be removed. 【Features】 - Ceramic is used at the nozzle tip of the main body - Simple integrated nozzle - Strainer is standard equipment for small flow products and can be removed - The spray tip is made of ceramic and resin → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Ceramic three-piece shape! Disassemblable wedge-shaped distribution nozzle that generates fan-shaped spray.

The "Yamagata Distribution Nozzle V" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a three-part nozzle that uses ceramic in the spray chip nozzle section, consisting of a spray chip, cap, and adapter, allowing only the worn spray chip to be replaced. 【Features】 ○ Disassemblable Yamagata distribution nozzle ○ Ceramic used in the spray chip nozzle section ○ Strainer is standard equipment for small spray volume products and can be removed ○ The cell team consists of ceramic and resin spray chips → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coin-shaped standard fan nozzle "Yamagata distribution nozzle (thin type) CVVP"

Coin-shaped standard fan nozzle "Yamagata distribution nozzle (thin type) CVVP"

Nozzle with a mountain-shaped distribution pattern of spray that is strong in the center and gradually weakens towards both ends.

The "Wedge-Shaped Distribution Nozzle (Thin Type) CVVP" can generate a fan-shaped spray with a wedge-shaped flow distribution that is strong in the center and gradually weakens towards both ends. The material is S303 or S316. It features a fully threaded outer circumference for easy wall embedding in a one-piece structure. This coin-shaped nozzle is designed to be extremely thin, allowing it to be screwed into a shower pipe without protruding from the outer surface of the pipe, making nozzle arrangement in tight spaces easy. 【Features】 ○ Wedge-shaped distribution nozzle (thin type) ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Coin-shaped with an extremely thin nozzle thickness ○ Easy nozzle arrangement in tight spaces ○ One-piece structure that allows for wall embedding For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Fan-Shaped Nozzle "Uniform Thickness Distribution Nozzle WVVEP"

1 Fluid Fan-Shaped Nozzle "Uniform Thickness Distribution Nozzle WVVEP"

Reduction in the number of nozzles and realization of water savings! Wide spray with evenly distributed fan-shaped nozzles.

The "Wide Width Uniform Distribution Nozzle WVVEP" is a single-fluid wide-width uniform fan-shaped nozzle capable of covering a large area with strong impact force. It has a large foreign object passage diameter and a simple structure that is less prone to clogging. Compared to standard fan-shaped nozzles, it has a greater spread in the direction of spray thickness. The spray pattern is strong in the center and gradually weakens towards the ends, resulting in a wide spray thickness. The ratio of the width to thickness of the spray pattern is 3 to 4:1. It is ideal for roll cooling, thick plate and hot-rolled steel plate cooling, and slab cooling. 【Features】 ○ Wide spray thickness pattern ○ Reduction in the number of nozzles, achieving water savings ○ Wide-width uniform fan-shaped nozzle ○ Large foreign object passage diameter and less prone to clogging ○ Strong impact force and strong cooling capability For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform fan-shaped nozzle "Eccentric Uniform Distribution Nozzle OVVEP"

Uniform fan-shaped nozzle "Eccentric Uniform Distribution Nozzle OVVEP"

Metal one-piece! A single fan-shaped nozzle that generates an eccentric fan-shaped spray from the nozzle axis.

The "Eccentric Uniform Distribution Nozzle OVVEP" generates an eccentric fan-shaped spray from the nozzle axis, allowing for an even flow distribution across the entire spray pattern. It eliminates spray liquid accumulation when multiple nozzles are arranged. This integrated type does not require diagonal mounting of the nozzle. The material is S303 or B (brass), and it is a fully metal integrated nozzle. It is ideal for use in industries such as steel, electronics, paper, pulp, printing, food, and agriculture, forestry, and fisheries. 【Features】 - Eccentric spray pattern with uniform flow distribution across the entire area from the nozzle axis - Eliminates spray liquid accumulation when multiple nozzles are arranged - Integrated type that does not require diagonal mounting of the nozzle - Fully metal integrated nozzle - Material is S303 or B (brass) For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) VV"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) VV"

All-metal three-piece design! Disassemblable serrated distribution nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VV" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. It is a fully metal three-part nozzle consisting of a spray tip, cap, and adapter, allowing only the worn spray tip to be replaced. The strainer is standard equipment for small spray products and is also removable. 【Features】 ○ Yamagata distribution nozzle ○ Disassemblable ○ Fully metal three-part design ○ Uniform flow distribution across the entire width ○ Strainer is standard equipment for small spray products For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

All-metal or all-plastic! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VVP" can generate a fan-shaped spray with a Yamagata flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends will result in an even flow distribution across the entire width. It is a simple integrated nozzle made of either all metal or all resin, which is directly screwed into the pipe body. A strainer (available only for metal body products) is standard equipment for small flow products and can be removed. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ All metal or all resin construction ○ Even flow distribution across the entire width ○ Strainer standard equipment for small flow products For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.